0%

Airport Engineering – Civil Eng. – LS

Airport Engineering – Set 1 (Civil Eng.)

Dear ! This is Airport Engineering – Set 1 (Civil Eng.)  Quiz and it contains 50 questions.


Explore the fascinating world of Airport Engineering with our Set 1 quiz designed for Civil Engineering enthusiasts. Test your knowledge and skills in airport design, construction, and operations. From runway planning to terminal layout, navigate through various concepts and challenges in this specialized field. Join us now and expand your understanding of Airport Engineering in this engaging quiz for Civil Engineers!


Happy Learning!

1 / 50

1. For the proposed runway stated in if the aerodrome reference temperature is 17.2°, the net designed length of the runway is

2 / 50

2. The strength of winds is measured with the help of

3 / 50

3. The engine failure case for determining the basic runway length may require

4 / 50

4. The width and interval of transverse centre line bars along the extended centre line of runway, in approach lighting system are

5 / 50

5. The thickness design of the pavement, is decided on the load carried by

6 / 50

6. The main disadvantage of angle nose out parking configuration of aircraft is that the

7 / 50

7. Zero fuel weight of an aircraft is:

8 / 50

8. The depressions and undulations in the pavement, are caused due to

9 / 50

9. According to I.C.A.O. all markings on the runways are painted white and on taxiways

10 / 50

10. If the monthly mean of average daily temperature for the hottest month of the year is 25°C and the monthly mean of the maximum daily temperature of the same month of the year is 46°C, the airport reference temperature is

11 / 50

11. From the end of an instrumental runway, the approach surface rises outwards

12 / 50

12. According to I.C.A.O. the slope of transitional surface at right angles to the centre line of runway, is kept

13 / 50

13. According to the International Civil Aviation Organization (I.C.A.O.) the strength of runway pavements, have been coded by

14 / 50

14. The length of runway under standard conditions is 2000 m. The elevation of airport site is 300 m. Its reference temperature is 33.05°C. If the runway is to be constructed with an effective gradient of 0.25 percent, the corrected runway length will be

15 / 50

15. Which of the following is used for servicing and repairs of the aircraft?

16 / 50

16. The bearing of the longest line of a wind rose is S 45° E, the bearing of the runway will be numbered

17 / 50

17. As per ICAO recommendation, the rate of change of longitudinal gradient per 30 m length of vertical curve for A and B type of airports is limited to a maximum of

18 / 50

18. The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is

19 / 50

19. Which of the following is an example of failure in flexible pavements?

20 / 50

20. Two single runways may be arranged so as to have

21 / 50

21. As per ICAO, the minimum basic runway length for A and E type of airport will be

 

22 / 50

22. Total correction for elevation, temperature and gradient for a runway should not be more than

23 / 50

23. The runway orientation is made so that landing and takeoff are

24 / 50

24. An airport has 4 gates. If the weighted average gate occupancy time is 30 minutes and gate utilization factor is 0.5, then the capacity of the gate will be

25 / 50

25. If lift off distance of an craft is 2000 m, the clear way at the end of the runway should not be less than

26 / 50

26. The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is

27 / 50

27. Castor angle is defined as the angle

28 / 50

28. The total length of a runway is 1000 m. The elevation at distance 0,200 m, 400 m, 600 m, 800 m and 1000 m are 100.0 m, 99.2 m, 101.0 m, 101.8 m, 101.4 m and 101.0 m respectively. The effective gradient of runway will be.

29 / 50

29. Consider the following statements regarding ICAO recommendation for correction to basic runway length of these statements 1. The basic runway length should be increased at the rate of 7 percent per 300 m rise in elevation above the mean sea level. 2. The basic runway length after having been corrected for elevation should be further increased at the rate of 1 percent for every 1°C rise in airport reference temperature above the standard atmospheric temperature at that elevation. 3. The runway length after having been corrected for elevation and temperature should be further increased at the rate of 20% for every 1 percent of effective gradient.

30 / 50

30. The runway length after correcting for elevation and temperature is 2845 m. If the effective gradient on runway is 0.5 percent then the revised runway length will be

31 / 50

31. Pick up the component not applicable to aeroplanes

32 / 50

32. Effective length of a runway is the distance between

33 / 50

33. The best direction of a runway is along the direction of

34 / 50

34. The size of landing area for multi engine helicopters operating under 1 FR conditions is

35 / 50

35. The threshold markings are

36 / 50

36. The centre to centre spacing of heliport lighting along the periphery of landing and takeoff area should be

37 / 50

37. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are

38 / 50

38. For the proposed air port, the survey project provides

39 / 50

39. For night landing, the thresholds are lighted

40 / 50

40. In approach areas of runways equipped with instrumental landing facilities any object within 4.5 km distance from runway end shall be considered as an obstruction if its height is more than

41 / 50

41. The slope of the obstruction clearance line from the boundary of the heliport should be

42 / 50

42. Conical surface of the approach area rises outwards

43 / 50

43. Geometric design of holding apron of these statements

44 / 50

44. The bearing of the runway at threshold is 290°, the runway number is

45 / 50

45. The slope of the transitional surface for A, B and C type of runway shall be

46 / 50

46. The air is blowing at a speed of 75 knots in the direction of the aircraft flying at a ground speed of 775 knots. The air speed of the aircraft, is

47 / 50

47. For supersonic transport aircraft, the minimum turning radius of taxiway is

48 / 50

48. As per ICAO recommendation, minimum width of safety area for instrumental runway should be

49 / 50

49. According to the International Civil Aviation Organization (I.C.A.O.), the runway lengths of aerodromes, have been coded by

50 / 50

50. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with

Your score is

Share this Quiz with your friends! 

LinkedIn Facebook
0%

Exit

You cannot copy content of this page

Scroll to Top